Taran The Idiot

4 way USB Hub this board is a usb hub that will extend the amount of usb-A ports I have on my computer so I can connect more things to it at the same time. I need this because my computer only has 2 usb ports be default and hubs are kinda expensive so I thought it would be cool to make one myself. $33.76 AUD One challenge was trying to find through hole versions of all the parts in the tutorial. I looked for about an hour before finding out that JLCPCB does an assembly service.

Fold Board

This is the fold board, a keyboard that folds. It folds and functions completely normally. It has usb connectivity and is powered by an orpheus pico

This Weather station shows you the weather based on where the slider is. But the places to get the weather are all over the place! It could drive someone insane while trying to understand how it works.

Taranium Rover

Its a custom RC Car with 4WD that communicates over ESPNow

Place this near any valuables and

An alarm clock to wake you up at 6am. you set it at night with the button and the stepper motor will slap a wall or table with a 3d print attachment

this weather station requires there to be movement to display the weather. and if that wasn't weird enough, you also need to put the slider in the correct position in order to get the output you want. It could even drive someone crazy while trying to use it.

Curtain Manager Alarm Clock

This is an alarm clock that pulls open my curtains in the morning. It also closes them at night. On top of all these features, I also added weather detection and plan to use buttons to have some sort of interactiveness with the display.

This is my macropad. I spent a lot of time on it and i hope you accept it. the things I need: - 11 MX cherry red switches(or anything linear you have) - 12 1n4148 diodes - 1 ec11 rotary encoder with switch - 1 xiao rp2040 - 1 128x32 i2c oled 0.91 inch (pls dont solder this) - 1 pcb - 2 4.7k resistors - 1 usbA to usbC cable (pretty pls🥺) - cool stickers(im in #alex-containment-chamber) - can You print the case in Carmine red with black keycaps? - 1 encoder knob, same colour as keycaps - 4 of the insets you said to use on the hackpad website - 4 14 mm long m3 screws - any PCB colour all parts are through hole thank you.

Taranium Hub

This is a 4 port usb hub with 2 USBa ports and 2 USBc ports. It has a pair of A and C on each side of the board, allowing it to be reversable.

Crossbow

A Crossbow that shoots people and is (nearly)Automated - By Taran and Koji

A game thingy

This project checks your acceleration and give a different colour output based on it. if you accelerate too fast then It starts beeping telling you to slow down

name: "Taran Mittal" slack_handle: "@Taran Mittal" github_handle: "@Overlord-Runt" tutorial: all original --- Ghost keycahin This is a project I made for trick or trace and is a ghost that you can use as a keychain. It has a bettery connector and green lightup led eyes. If you press the button on its nose it mades a lound noise to scare away your friends. It will cost $4.53 USD I wanted to make something spooky for trick or trace and was just messing around to find something that looks good until I found this. (also I dont really want to spend my funds on this, I just wanted to do trick or trace for the stickers)